Spring Pins

Spring Pins

NOMINAL SIZE OR BASIC PIN DIAMETER	(A) PIN DIAMETER		(B) CHAMFER DIAMETER	(C) CHAMFER LENGTH		(F) STOCK THICKNESS	RECOMMENDED HOLE SIZE		DOUBLE SHEAR LOAD MIN LB.
	(A) PIN DIAMETER		(B) CHAMFER DIAMETER	(C) CHAMFER LENGTH		(F) STOCK THICKNESS	RECOMMENDED HOLE SIZE		MATERIAL
	MAX	MIN	MAX	MAX	MIN	BASIC	MAX	MIN	SAE 100-1095 AND SAE 51420	SAE 30302 AND 30304
1/16 0.062	0.069	0.066	0.059	0.028	0.007	0.012	0.065	0.062	430	250
5/64 0.078	0.086	0.083	0.075	0.032	0.008	0.018	0.081	0.078	800	460
3/32 0.094	0.103	0.099	0.091	0.038	0.008	0.022	0.097	0.094	1,150	670
1/8 0.125	0.135	0.131	0.122	0.044	0.008	0.028	0.129	0.125	1,875	1,090
9/84 0.141	0.149	0.145	0.137	0.044	0.008	0.028	0.144	0.140	2,175	1,260
5/32 0.156	0.167	0.162	0.151	0.048	0.010	0.032	0.160	0.156	2,750	1,600
3/16 0.188	0199	0.194	0.182	0.055	0.011	0.040	0.192	0.187	4,150	2,425
7/32 0.219	0.232	0.226	0.214	0.065	0.011	0.048	0.224	0.219	5,850	3,400
1/4 0.250	0.264	0.258	0.245	0.065	0.012	0.048	0.256	0.250	7,050	4,100
5/16 0.312	0.330	0.321	0.308	0.080	0.014	0.062	0.318	0.312	10,800	6,300
3/8 0.375	0.395	0.385	0.368	0.095	0.016	0.077	0.382	0.375	16,300	9,500
7/16 0.438	0.459	0.448	0.430	0.095	0.017	0.077	0.445	0.437	19,800	11,500
1/2 0.500	0.524	0.513	0.485	0.110	0.025	0.094	0.510	0.500	27,100	15,800

ITW Bee Leitzke Spring Pins

Spring Pins

Thread-Rite Screw Products is not responsible for rust on Heat treated parts ordered plain without rust inhibitors, from the time they leave our dock. Thread-Rite Screw Products is not responsible for any rust on parts ordered plain after seven (7) days from shipment date.

*Approx Length Tolerances
0.187 to 1.000 +\- 0.15
1.001 to 2.000 +\- 0.20
2.001 to 3.000 +\- 0.25
3.001 to 4.000 +\- 0.030

Spring Pins : Double Up For Heavy Duty Applications
Use one standard Hobbs spring pin inside another for additional strength. Install the smaller pin inside the longer pin, then insert into the application.	Pin	Diameters
	Inside	3/32	1/8	5/32	3/16	7/32	5/16
	Outside	5/32	7/32	1/4	5/16	3/8	1/2