Precision
cast threaded inserts have sharp, staggered barbs or splines for
strong torque-out resistance and high pull-out strength. Compatible
with wood and plastic. Ideal for the furniture Industry
Type of Insert
Description
Dynacast Part Number
Imperial Thread Size
Dynacast Part Number
Metric Thread Size
Length
Low Profile
Knock In Insert
Type 1 Knock In Inserts have low profile decorative heads which
is ideal for applications where the head of the nut is exposed. Has
a closed end and sharp barbs designed for easy driving yet undercut
design holds firmly. Can be plated in a variety of finishes for a
decorative appearance
291212
8-32
TBD
M4 x .5
13MM
291213
10-24
TBD
M4.5 x .75
13MM
291214
10-32
TBD
M4.5 x .5
13MM
291019
1/4 - 20
TBD
M6x .75
18MM
Flush Tapered Shank
Screw-In Insert
Type E Screw-In inserts have hex recess drivers and can be set
just below the mounting surface. External threads are tapered and
are sharp and clean with axial flutes to prevent jamming. Has high
retention and has the benefit of economy.
291110
10-24
TBD
M4.5 x .75
13MM
291111
10-32
TBD
M4.5 x .5
13MM
291112
1/4 - 20
291028
M6 x 1.0
13MM
291115
1/4 - 20
29116
M6 x 1.0
20MM
291210
5/16 - 18
112800
M8 x 1.25
20MM
Flush Straight Shank
Screw-In Insert
Type SIT Screw-In Inserts with hex drives and straight shanks is
similar to the tapered shank inserts except the external threads
are not tapered making centering and starting easy. It has the benefit
of economy and requires a smaller pilot hole, which is beneficial
in edge and end gain use.
291101
10-24
TBD
M4.5 x .75
13MM
291100
10-32
TBD
M4.5 x .5
13MM
291102
1/4 - 20
291026
M6 x 1.0
13MM
291117
5/16 - 18
TBD
M6 x 1.25
13MM
291103
1/4 - 20
TBD
M6 x 1.0
25MM
291113
5/16 - 18
TBD
M8 x 1.25
25MM
Flanged Tapered Shank
Screw-In Insert
Type D Screw -in hex drive tapered shank inserts are designed for
rapid engagement into the material. The flanged head design provides
controlled depth and straight driving. The external thread design
provides high retention and meets industry torque and tensile standards.
115586
10-32
10MM
291303
1/4 - 20
291029
M6 x 1.0
10MM
291308
10-24
TBD
M4.5 x .75
13MM
291310
10-32
TBD
M4.5 x .5
13MM
291301
1/4-20
291027
M6 x1.0
13MM
291302
1/4 - 20
TBD
M6 x1.0
20MM
291311
1/4 - 20
TBD
M6 x1.0
25MM
291312
5/16 - 18
TBD
M8 x 1.25
25MM
Flanged Straight Shank
Screw-in Insert
Type SIS Screw-In hex drive straight shank Inserts have a low profile
flat head configuration which allows easy centered driving. This
insert can be used with a smaller pilot hole than most other inserts.
291201
10-24
TBD
M4.5 x .75
13MM
291202
10-32
TBD
M4.5 x .5
13MM
291203
1/4-20
TBD
M6 x 1.0
13MM
291204
1/4-20
291030
M6 x 1.0
25MM
Connector Nut
Truss Head
Type JZN The truss head provides a low profile and excellent bearing
surface. Threads are deep allowing for ample adjustment. The slot
is clean and precisely formed providing no-slip screw driver assembly.
