| Material |
Test
Temperature
Max. Min. |
Tensile
Strength at 73 0 F
D.A.M.
ASTM D-638
(PSI) |
UL
Flame
Rating |
Gamma
Radiation
Resistance |
UV
Resistance
|
Military,
Federal,
ASTM, and FDA
Specifications |
| Nylon |
| 6/6 |
| General |
| Purpose |
|
|
|
|
|
|
| MIL-M-20693A |
| FED-LP-410A |
| ASTM-D
4066PA111 |
| FDA
CFR 177,1500 |
|
| Nylon |
| 6/6 |
| Heat |
| Stabilized |
|
|
|
|
|
|
| MIL-M-20693A |
| FED-LP-410A |
| ASTM-D
4066PA121 |
|
|
|
|
|
|
|
|
|
| MIL-M-20693B |
| ASTM-D
4066PA181 |
| UL746C |
|
|
|
|
DISCLAIMER
OF WARRANTY AND LIABILITY
The
information and recommendations are presented in good faith and believed
to be correct as of the date hereof, Thread-Rite Screw Products Inc. makes
no representations or warranties as to the completeness or accuracy thereof.
Information is supplied upon the condition that the persons receiving
same will make their own determination as to its suitability for their
purposes prior to use. In no event will Thread-Rite Screw Products Inc.
be responsible for damages of any nature whatsoever resulting from the
use of or reliance upon information or the product to which information
refers. Nothing contained herein is to be construed as a recommendation
to use any product, process, equipment or formulation in conflict with
any patent, and Thread-Rite Screw Products Inc. makes no representation
or warranty, expressed or implied, that the use thereof will not infringe
upon any patent. No representations or warranties, either expressed or
implied, of merchantability, fitness for a particular purpose or of any
other nature are made hereunder with respect to information or the product
to which information refers. |
