Thread Rite Screw Products - Fasteners Thread Rite Screw Products - Fasteners Thread Rite Screw Products - Fasteners Thread Rite Screw Products - Fasteners Thread Rite Screw Products - Fasteners
Thread Rite Screw Products - Fasteners Thread Rite Screw Products - Fasteners
Thread Rite Screw Products - Fasteners
Thread Rite Screw Products - Fasteners
Thread Rite Screw Products - Fasteners
Authorized Stocking Distributor for: POP Fasteners ITW Shakeproof ITW Fastex ITW Bee Leitzke SPS technologies Rotor Clip HEYCO Specials Contact Thread Rite Screw Products - Fasteners

Pop Nuts Blind Rivet Nuts

JACK NUT® Installation Tools

 

JNT7530/7529

JACK NUT® Pneumatic Tools
For  the high volume setting of all Jack nut inserts, these torque adjustable tools set the inserts by rotation automatically compensating for material thickness variations. Reverses for removal.

Jack Nut Installation Tools

Part Number JNT7530 JNT7529
Weight 1.7 lb (0.77 kg) 2.0 lb (0.91 kg)
Dimensions 8 x 6.5 x 1.5 in 9 x 6.5 x 1.5 in
(203.2 x 165.1 x 38.1 mm) (228.6 x 165.1 x 38.1 mm)
Air Pressure 90 psi (6.2 bar) 90 psi (6.2 bar)
Speed (RPM) 2300 750
Torque 15 in-lbs (1.69 N-m) 50 in-lbs (5.65 N-m)
Mandel Selection
Thread Size Mandrel
6-32 JNT7500-632
10.24 JNT7500-1024
1/4-20 JNT7500-1420
M4 JNT7500-M4
M5 JNT7500-M5
M6 JNT7500-M6

 

JNT2400

JACK NUT® Heavy Duty Hand Tool Rugged steel tool uses interchangeable mandrels to set all sizes. Low grip effort is required and proper stroke is preset for positive setting without over tightening.



JNT2400 Jack Nut Tool

Part Number JNT2400
Weight 1.0 lb (0.45 kg)
Dimensions 8.75 x 4.125 x 1.0 in
(222.3 x 108 x 25.4 mm)
Thread Size Mandrel
6-32 JNT2400-632
10.24 JNT2400-1024
1/4-20 JNT2400-1420
M4 JNT2400-M4
M5 JNT2400-M5
M6 JNT2400-M6

 

JNT2200

JACK NUT® Hand Tool An economical, easy to use tool for low volume installation in any material. Thread mandrel into Jack Nut, insert into hole, and squeeze handles to set. Interchangeable mandrels available to set all sizes

JNT 2200 Jack Nut Tool

Part Number JNT2200
Weight .5 lb (0.23 kg)
Dimensions 8.5 x 2.75 x .75 in
(215.9 x 69.9 x 19.1 mm)
Thread Size Mandrel
6-32 JNT2200-632
10.24 JNT2200-1024
1/4-20 JNT2200-1420
M4 JNT2200-M4
M5 JNT2200-M5
M6 JNT2200-M6

 

JNT1100

JACK NUT® Friction Wrench Tool For use when installing a limited number of jack nuts. Insert the wrench between the screw and the head of the fastener. Hold the wrench and run the screw to set the jack nut.

JNT 1100 Jack Nut Tool

Part Number JNT1100
Weight 0.4 oz (11.34 g)
Dimensions 4 x .625 x .063 in
(101.6 x 15.9 x 1.6 mm)

Pop Nut Products:

POP Nut Strength Test

POP Nut Joint Design
POP Nut Advantages
POP Nut Introduction
Pop Nut Blind Rivet Nuts
POP Nut Blind Rivet Nuts 2

POP Nut Open Body Nut

POP Nut TK Open Body Nut

POP Nut TL Open Body Nut

POP Nut TH Open Body Nut

POP Nut ST Open Body Nut

POP Nuts Hex Nut

POP Nut Softset Nut

POP Nut Knurled Nut

POP Nut Blind Nut Specs
POP Nut Applications

POP Nut Capabilities

POP Nut Specs &   Conversion

POP Nut Tools
POP Nut Tool PNT110
POP Nut Tool PNT310
POP Nut Tool PNT800a
POP Nut ToolPNT1000
ProSet® 1600 Series
ProSet® 2500 Series
ProSet® 3400 Series
POP® AutoSet®
POP® PRG510
POP® PRG540 Series
POP® MCS 5250A In-Line
Rivet Tool
POP® PRT5400 Series
POP® MCS5800 Battery Operated Rivet Tool
POPSet™ Manual Tool Series
POPmatic® Riveting Systems Solutions

WELLNut Threaded Inserts
WELL Nut Standard Nut

WELL Nut Standard Chart
WELL Nut Sleeve Nut

WELL Nut Advantages

WELL Nut Strength test
WELL Nut Inch Metric

Jack Nut installation
Jack Nut Tools

Video

See POP® Tools in Action

ProSet® 2100 SeriesView Windows Media (.wmv)

See AutoSet® in Action

ProSet® 2100 SeriesView Windows Media (.wmv)

Join Our Mailing List for Specials and Discounts - Opt In Today!

Pop Rivets - Fasteners
Pop Nut - Fasteners and Tools
ITW Fastex
ITW Shakeproof
HEYCO Molded Products
Dynacast
UMBRAKO - SPS Technologies
Parker Kalon Swage From Screws Plasti Fast Fasteners
Spirol Products
Southco
Thread Rite Screw Products - Fasteners
Rotor Clip Retaining Rings

Rotor Clamp
Thread Rite Screw Products - Fasteners

Thread Rite Screw Products - Fasteners

Check Out our Thread-Rite Demo
Find out How Thread-Rite is right for you!

Military Reference Chart | Thread Rite Conversion Chart | Sitemap | RSS


Thread-Rite Screw Products, Incorporated
Implements a Quality Management System in accordance with:

ISO 9002 Certified
Certificate Number: 862
RoHS CompliantRoHS compliant Certificate Number: 862
Certificate Number: 862
HSB Registration ServicesRegistration
Services


THREAD-RITE SCREW PRODUCTS, Inc.

9630 W. Foster Avenue Chicago, Illinois 60656
Phone: 773.992.2290 Fax: 773.992.2297

trsales@thread-rite.com

 


IMAGUN Web Design and Marketing Naples Florida
IMAGUN Web Design & Development
© 1999 - 2010 all rights reserved