POP NUT Manual Tools, PNT310, PNT410

POP NUT ™ Manual Tools

PNT310 Lever Tool

The PNT310 is a double lever tool with a pull-to-remove plunger. The 310 is designed to install the full range of POP NUT ™ products.

Thread the POP NUT ™ onto the tool mandrel
Place the POP NUT ™ in the hole
Squeeze the tool handles together
Pull the plunger until the mandrel unthreads
Note: The 310 tool is featured with a stroke control gauge and setting function. See the tool manual for details

PNT310

		Mandrel +	Kit Includes
Thread Size	Complete Tool	Nosepiece Kit	Mandrel	Nosepiece
To inslall TK ,TL, and TH with Pilot Nosepiece
6-32unc	-	-	FAM400-462	FAM400-428
8-32unc	-	-	FAM400-234	FAM400-429
10.24unc	PNT310-IP	TAM400-488	FAM400-237	FAM400-430
10.32unc			FAM400-464	FAM400-430
1/4-20unc			FAM400-239	FAM400-431
5/16-18unc			FAM400-241	FAM400-432
3/8-16unc			FAM400-268	FAM400-433
1/2-13unc	-	-	FAM400-466	FAM400-434
M4	-	-	FAM400-317	FAM400-444
M5	PNT310-MP	TAM400-489	FAM400-132	FAM400-445
M6			FAM400-149	FAM400-446
M8			FAM400-152	FAM400-447
M10			FAM400-163	FAM400-448
M12	-	-	FAM400-470	FAM400-449


		Mandrel +	Kit Includes
Thread Size	Complete Tool	Nosepiece Kit	Mandrel	Nosepiece
To Inslall ST with flat Nosepiece
6-32unc	-	-	FAM400-462	FAM400-458
8-32unc	-	-	FAM400-234	FAM400-245
10.24unc	PNT310-I	TAM400-490	FAM400-237	FAM400-247
10.32unc			FAM400-464	FAM400-247
1/4-20unc			FAM400-239	FAM400-249
5/16-18unc			FAM400-241	FAM400-251
3/8-16unc			FAM400-268	FAM400-265
1/2-13unc	-	-	FAM400-466	FAM400-459
M4	-	-	FAM400-317	FAM400-228
M5	PNT310-M	TAM400-320	FAM400-132	FAM400-171
M6			FAM400-149	FAM400-173
M8			FAM400-152	FAM400-176
M10			FAM400-163	FAM400-178
M12	-	-	FAM400-470	FAM400-208

PNT410 Heavy-Duty Lever Tool

The PNT410 has a patented cam mechanism that reduces the amount of forces to install the larger size POP NUT ™s. This tool can set up to M12 SS POP NUT ™ products.

Thread the POP NUT ™ onto the tool mandrel
Place the POP NUT ™ in the hole
Squeeze the tool handles together
Spin the reverse knob and the mandrel unthreads
Note: The 410 tool is featured with a stroke control gauge and setting function. See the tool manual for details

PNT 410

		Mandrel +	Kit Includes
Thread Size	Complete Tool	Nosepiece Kit		Mandrel	Nosepiece
To inslall TK ,TL, and TH with Pilot Nosepiece
10.24unc	PNT410-IP	TAM400-482		FAM400-475	FAM400-430
10.32unc				FAM400-476	FAM400-430
1/4-20unc				FAM400-477	FAM400-431
5/16-18unc				FAM400-478	FAM400-432
3/8-16unc				FAM400-479	FAM400-433
1/2-13unc				FAM400-480	FAM400-434
M5	PNT410-MP	TAM400-483		FAM400-336	FAM400-445
M6				FAM400-337	FAM400-446
M8				FAM400-338	FAM400-447
M10				FAM400-339	FAM400-448
M12				FAM400-340	FAM400-449
		Mandrel +		Kit Includes
Thread Size	Complete Tool	Nosepiece Kit		Mandrel	Nosepiece
To Inslall ST with flat Nosepiece
10.24unc	PNT410-I	TAM400-481		FAM400-475	FAM400-247
10.32unc				FAM400-476	FAM400-247
1/4-20unc				FAM400-477	FAM400-249
5/16-18unc				FAM400-478	FAM400-251
3/8-16unc				FAM400-479	FAM400-265
1/2-13unc				FAM400-480	FAM400-459
M5	PNT410-M	TAM400-341		FAM400-336	FAM400-171
M6				FAM400-337	FAM400-173
M8				FAM400-338	FAM400-176
M10				FAM400-339	FAM400-178
M12				FAM400-340	FAM400-208

Pop Nut Products:

• POP Nut Strength Test
• POP Nut Joint Design
• POP Nut Advantages
• POP Nut Introduction
• Pop Nut Blind Rivet Nuts
• POP Nut Blind Rivet Nuts 2
• POP Nut Open Body Nut
• POP Nut TK Open Body Nut
• POP Nut TL Open Body Nut
• POP Nut TH Open Body Nut
• POP Nut ST Open Body Nut
• POP Nuts Hex Nut
• POP Nut Softset Nut
• POP Nut Knurled Nut
• POP Nut Blind Nut Specs
• POP Nut Applications
• POP Nut Capabilities
• POP Nut Specs & Conversion

• POP Nut Tools
• POP Nut Tool PNT110
• POP Nut Tool PNT310
• POP Nut Tool PNT800a
• POP Nut ToolPNT1000

• WELLNut Threaded Inserts
• WELL Nut Standard Nut
• WELL Nut Standard Chart
• WELL Nut Sleeve Nut
• WELL Nut Advantages
• WELL Nut Strength test
• WELL Nut Inch Metric

• Jack Nut installation
• Jack Nut Tools

• Contact Us

9630 W. Foster Avenue Chicago, Illinois 60656
Phone: 773.992.2290 Fax: 773.992.2297
trsales@thread-rite.com

Thread-Rite Screw Products, Incorporated
Implements a Quality Management System in accordance with:

	Certificate Number: 862
Certificate Number: 862	RoHS compliant
Certificate Number: 862
	Registration Services