POP NUT Brand Blind Rivet Nut Index
|
| POP Nut Slit Body |
POP Nut Jack Nut |
POP NUT Slit Body
Slit Body for excellent pull out resistance
- The Slit Bady forms into
four legs on the backside of
the parent material providing
increased pull out strength in
thin sheet metals or plastics.
- Thread size M6
- Material: Steel
|
JACK NUT®
- The JACK NUT® can be
installed into metal, plastics,
composites glass and
cardboard materials without
damaging the parent material.
The 4 legs of the JACK NUT®
spread against the backside
of the material.
- Thread size : M4 M5 M6
- Material : Steel
|
| POP Nut Tube Nut |
POP Nut Tools |
POP Nut Tube Nut
Designed to install on a curved surface
- •The underside of the Tube Nut head is
concave to matchspecific tube diameters.
This feature provides a flat mounting
surface and exceptional spin
out resistance.
- Thread size M6
- Material: Steel
|
POP NUT Tools are available in hand operated pneumatic, hydraulic and fully automated designs.
- Hand Tools:
- PNT11O
- PNT21O
- PNT31O
- PNT410
- Pneumotic Type :
- PNT800A
- PNT800A-PC
- PNT1 000
|
WELL NUT |
| Well Nut Standard Type |
Well Nut With Sleve |
- The WELL NUT® is mode
from EDPM or Chloroprene
rubber and forms a backside
flange when the mating
screw is tightened. The
WELL NUT® can seal on
application and isolate
vibration, electrical
conductivity and galvanic
corrosion of dissimilar
metals.
- Thread size : M3 M4 M5 M6 M8
- Material : Chloroprene rubber, EPDM
|
- The metal sleeve in this nut
contacts the threaded internal
brass nut allowing the mating
screw to be tightened to
proper torque specifications.
This design is ideal for
pre-ottachment with the
mating screw to a component
reducing assembly
complexity and cost.
- Thread size : M3 M4 M5 M6 M8
- Material : Chloroprene rubber, EPDM
|
| Well Nut Large Flange |
Well Nut Snap In |
• This large flange WELL
NUT® provides additional
support for the parent
material and mating
component.
* Thread size : M3 M4
MS MO
U Material : Chforoprene
rubber, EPDM |
WELL NUT3 Snap jn
• This WELL NUT® design
includes a snap in feature on
the shank that allows the part
to be pre-attached to the
parent material.
S Thread size : M3 M4
MS MO
a Material : Chloraprene
rubber, EPDM |
| |
RoHS compliant 
