Well Nut Sleeve Type - Pop Nuts

Well Nut Sleeve Type

Well Nut Standard

Well Nut Cross Section Sleeve

The metal sleeve in this WELL Nut design contacts the nut portion and allows the mating screw to be tightened to the appropiate torque values.

Well Nut Standard

Material:
Body: Chloroprene rubber
Nut: Brass

Well Nut Standard

The above explinationj of model name does not apply to the WELL Nut incicated by †

All WELL Nut indicated by † are made of chloroprene rubber (body) and brass nut.

Nominal Thread Size M	Hole Diameter +0.3/.0 (mm)	Model Name	Recommended Grip Range (mm)	L (mm)	D (mm)	H (mm)	P (mm)	F (mm)	Hardness (HsA)	Weight (g)	Optimum Torque (N-m)	Tensile		Sheer (N)	Compressive (N)
												Allowable	Failure	Allowable	Allowable
M3 x 0.5	7.1	C-320L-SV	0.5-2.0	13.5	7.0	10.5	3.0	9.5	70	1.3	0.10-0.98	20	390	20	39
M4 x 0.7	8.5	C-420-SV		12.7	8.4	11.5	1.2	8.2	70	1.7	0.25-1.96	34	665	34	69
		C-420-SV		15.0		12.5	3.5	10.5		2.2			625
		C-420L-5-SV							50	2.1	0.10-1.96	29	380	29	49
M5 x 0.8	10.6	C-520-SV		14.9	10.5	13.5	1.2	9.7	70	3.0	0.34-2.94	44	610	44	78
		C-520L-SV		17.7		14.8	4.0	12.5		3.8	0.25-2.94		530
M6 x 1.0	13.9	C-620L-SV		22.0	13.8	18.9	4.5	15.8	70	7.6	0.78-11.76	59	980	29	110
		E-620L-SV								6.7			880

Well Nut Snap In Type

Pop NuWell NutWell Nut Snap In Type

Material:
Body: Chloroprene rubber
Nut: Brass

This WELL Nut design incorporates a snap in flange on the shank that allows the nut to be self-retained on the base material.

Well Nut Large Flange Type

Nominal Thread Size M	Hole Diameter +0.3/.0 (mm)	Model Name	Recommended Grip Range (mm)	L (mm)	D (mm)	RD (mm)	H (mm)	P (mm)	F (mm)	Hardness (HsA)	Weight (g)	Optimum Torque (N-m)	Tensile		Sheer (N)	Compressive (N)
Nominal Thread Size M	Hole Diameter +0.3/.0 (mm)	Model Name	Recommended Grip Range (mm)	L (mm)	D (mm)	RD (mm)	H (mm)	P (mm)	F (mm)	Hardness (HsA)	Weight (g)	Optimum Torque (N-m)	Allowable	Failure	Allowable	Allowable
M4 x 0.7	8.4	2D-832	0.4-1.3	10.9	7.9	9.3	12.7	1.3	6.5	70	1.3	345-490	34	440	34	69
M5 x 0.8	9.6	NP-1032	0.4-1.3	10.2	9.5	10.1	13.0	1.5	5.9	70	1.7	245-490	44	540	44	78

Pop Nut Products:

• POP Nut Strength Test
• POP Nut Joint Design
• POP Nut Advantages
• POP Nut Introduction
• Pop Nut Blind Rivet Nuts
• POP Nut Blind Rivet Nuts 2
• POP Nut Open Body Nut
• POP Nut TK Open Body Nut
• POP Nut TL Open Body Nut
• POP Nut TH Open Body Nut
• POP Nut ST Open Body Nut
• POP Nuts Hex Nut
• POP Nut Softset Nut
• POP Nut Knurled Nut
• POP Nut Blind Nut Specs
• POP Nut Applications
• POP Nut Capabilities
• POP Nut Specs & Conversion

• POP Nut Tools
• POP Nut Tool PNT110
• POP Nut Tool PNT310
• POP Nut Tool PNT800a
• POP Nut ToolPNT1000

• WELLNut Threaded Inserts
• WELL Nut Standard Nut
• WELL Nut Standard Chart
• WELL Nut Sleeve Nut
• WELL Nut Advantages
• WELL Nut Strength test
• WELL Nut Inch Metric

• Jack Nut installation
• Jack Nut Tools

• Contact Us

Check Out our Thread-Rite CD (Broadband Required)

Plastic Fasteners | Pop Rivets | Heli-Coil | Socket Products | BosScrew | Rotor Clip Retaining Rings | SinuLOC | Flexloc Nuts
Pop Rivets | Pop Nuts | Keps | Sems | Teks | Washers | Nuts | Metrics | Bolts - Screws | Specials | Rotor Clamp
Pop Nut Tools | Adhesive Bumpers | Self Clinching Fasteners | Contact | Home | Wire Terminals | Cable Ties
ITW Fastex | ITW Shakeproof | SPS Technologies | POP Fasteners | PK- Parker-Kalon | Dynacast
Computer Fasteners | Military Reference Chart | Thread Rite Conversion Chart | Sitemap | RSS

9630 W. Foster Avenue Chicago, Illinois 60656
Phone: 773.992.2290 Fax: 773.992.2297
trsales@thread-rite.com

Thread-Rite Screw Products, Incorporated
Implements a Quality Management System in accordance with:

	Certificate Number: 862
Certificate Number: 862	RoHS compliant
Certificate Number: 862
	Registration Services

Web Design and Development by:IMAGUN

© 1999 - 2008 all rights reserved