About Thread- Rite Screw Products!
Thread - Rite Screw Products Inc

 


Pop Nuts Blind Rivet Nuts

Well Nut Standard

Well Nut Standard

  • This standard WELL Nut made of rubber offers the basic function of quickly fastening to the base material from one side, and provides isolation from vibration, electrical conductivity and sealing.

Well Nut Standard

  • Material:
    Body: Chloroprene rubber
    Nut: Brass

Well Nut Standard

The above explinationj of model name does not apply to the WELL Nut incicated by †

All WELL Nut indicated by † are made of chloroprene rubber (body) and brass nut.
Nominal Thread Size M Hole Diameter (mm) Model Name
 Recommended Grip Range (mm) L(mm)
 D
(mm)		 H
(mm)		 P
(mm)		 F
(mm)		 Hardness
(HsA)		 Weight
(g)		 Optimum Torque
(N-m)		 Tensile Sheer
(N)		 Compressive
(N)
Allowable Failure Allowable Allowable
M3 x 0.5 6.6 C-330L 0.5-3.0 13.0 6.5 10.0 3.0 9.0 70 1.0 98-145 20 390 20 39
E-632 0.4-4.0 12.7 7.9 11.5 1.6 8.5 60 1.5 245-490 29 540 29 59
M4 x 0.7 8.0 C-440 0.5--4.0 12.2 7.9 11.0 1.2 7.7 70 1.3 245-390 34 665 34 69
C-440L 14.5 12.0 3.5 10.0 1.5 195-290 625
C-440L-5 50 98-145 29 380 29 49
M5 x 0.8 9.6 C-550 0.5-5.0 14.2 9.5 12.7 1.2 9.0 70 2.2 340-490 44 610 44 78
C-550L 17.0 14.0 4.0 11.8 2.8 245-390 530
†Q-1032 0.9-5.9 16.9 14.3 1.0 11.4 60 2.3 295-685 390
†H-1032 7.9-11.4 21.5 0.9 16.0 70 2.7 490-880 1270
†10-SL 8.0-16.0 26.7 1.3 21.3 60 3.2 295-685 1370
†10-XL 20.0-29.0 39.4 33.7 3.5 590-980 785
M6 x 1.0 12.8 C-630 05.-3.0 16.0 12.7 16.0 1.3 9.8 70 4.5 880-1180 59 1370 59 110
C-650L 0.5-5.0 21.0 17.8 4.5 14.8 5.9   980
E-650L 5.0 590-980 880
†W-1420 4.8-8.7 20.3 16.0 1.3 14.5 70 4.9 785-980 2160
†J-1420 6.4-11.6 26.7 20.7 5.7   2160
M8 x 1.25 15.9 E-820 0.5-2.0 18.4 15.7 22.2 1.2 9.8 60 8.3 980-1470 98 640 98 145
E-51618 0.8-4.7 9.1   1180

 

Well Nut Large Flange Type

Pop NuWell Nut Large Flange Type
  • Material:
    Body: Chloroprene rubber
    Nut: Brass
  • This large flange WELL Nut provides additional support to the mating componet and the parent material.
 Well Nut Large Flange Type
Nominal Thread Size M Hole Diameter (mm) Model Name
 Recommended Grip Range (mm) L(mm)
 D
(mm)		 H
(mm)		 P
(mm)		 F
(mm)		 Hardness
(HsA)		 Weight
(g)		 Optimum Torque
(N-m)		 Tensile Sheer
(N)		 Compressive
(N)
Allowable Failure Allowable Allowable
M3 x 0.5 6.3 C-632 11.0-13.0 25.0 6.1 14.1 0.9 18.8 70 1.2 200-290 20 290 20 39
M4 x 0.7 8.0 C-832 0.4-4.4 14.2 7.9 19.1 1.5 10.0 70 1.7 245-390 34 490 34 69
M5 x 0.8 9.6 †J-1032 0.8-5.8 17.8 9.5 19.1 2.0 12.2 60 2.9 390-685 44 590 44 78
†G-1032 20.5 4.7 14.8 3.8 390-685 44 440 44 78
M6 x 1.0 12.8 †D-1420 0.8-4.7 21.1 12.7 18.8 4.7 14.8 60 5.7 785-980 59 1470 59 110

Pop Nut Products:

• POP Nut Strength Test
• POP Nut Joint Design
• POP Nut Advantages
• POP Nut Introduction
 • Pop Nut Blind Rivet Nuts
• POP Nut Blind Rivet Nuts 2
• POP Nut Open Body Nut
• POP Nut TK Open Body Nut
• POP Nut TL Open Body Nut
• POP Nut TH Open Body Nut
• POP Nut ST Open Body Nut
• POP Nuts Hex Nut
• POP Nut Softset Nut
• POP Nut Knurled Nut
• POP Nut Blind Nut Specs
• POP Nut Applications
• POP Nut Capabilities
• POP Nut Specs &   Conversion

• POP Nut Tools
• POP Nut Tool PNT110
• POP Nut Tool PNT310
• POP Nut Tool PNT800a
• POP Nut ToolPNT1000


• WELLNut Threaded Inserts
• WELL Nut Standard Nut
• WELL Nut Standard Chart
• WELL Nut Sleeve Nut
• WELL Nut Advantages
• WELL Nut Strength test
• WELL Nut Inch Metric

• Jack Nut installation
• Jack Nut Tools

• Contact Us




Check Out our Thread-Rite CD (Broadband Required)

Plastic Fasteners | Pop Rivets | Heli-Coil | Socket Products | BosScrew | Rotor Clip Retaining Rings | SinuLOC | Flexloc Nuts
Pop Rivets | Pop Nuts | Keps | Sems | Teks | Washers | Nuts | Metrics | Bolts - Screws | Specials | Rotor Clamp
Pop Nut Tools | Adhesive Bumpers | Self Clinching Fasteners | Contact | Home | Wire Terminals | Cable Ties
ITW Fastex | ITW Shakeproof | SPS Technologies | POP Fasteners | PK- Parker-Kalon | Dynacast
Computer Fasteners | Military Reference Chart | Thread Rite Conversion Chart | Sitemap | RSS

Thread-Rite Screw Products Chicago, Illinois
9630 W. Foster Avenue Chicago, Illinois 60656
Phone: 773.992.2290 Fax: 773.992.2297
trsales@thread-rite.com


Thread-Rite Screw Products, Incorporated
Implements a Quality Management System in accordance with:

ISO 9002 Certified Certificate Number: 862


Certificate Number: 862
Certificate Number: 862


RoHS Compliant
RoHS compliant
ANSI - RAB

HSB Registration Services

 Registration
Services

Web Design and Development by:IMAGUN
IMAGUN Web Design & Development
© 1999 - 2008 all rights reserved