Open-end POP rivets, when set, resemble conventional tubular rivets. However unlike tubular rivets, the mandrel head is retained within the body of the Open-End POP Rivet. Providing strong, low cost fastenings, open-end rivets are ideal for a wide variety of applications. They are available in a wide variety of materials and combinations with dome, countersunk, or large-flange head styles. A universally accepted range of rivets suitable for most industrial riveting applications where the materials to be fastened do not have high load bearing requirements.

The 'POP�' Open type blind rivet is a hollow rivet pre-assembled on to a headed pin or mandrel. Rivet bodies are available in a range of materials for complete workpiece compatibility. The rivets are available in pure aluminum, aluminum 2.5%, 3.5% and 5.0% magnesium alloy, copper, mild steel, nickel-copper alloy, and stainless steel and are normally supplied with Break Stem mandrels which promote retention of the head of the mandrel in the set rivet body.

General Features

• Wide range of diameters
• Range of lengths suitable for material thicknesses up to 26mm
• Countersunk (120�) heads available
• Break head mandrels available in most sizes
• Large-flange rivets, giving wide load spread, available in aluminum alloy and nickel-copper
• Nickel-copper rivets particularly suitable for marine and other corrosive atmospheres.

POP NUTS

Well Nuts
Jack Nuts

POP Nut Tools
POP Nut Tool PNT110
POP Nut Tool PNT310
POP Nut Tool PNT800a
POP Nut ToolPNT1000ProSet® 1600 Series
ProSet® 2500 Series
ProSet® 3400 Series
POP® AutoSet®
POP® PRG510
POP® PRG540 Series
POP® MCS 5250A In-Line
Rivet Tool
POP® PRT5400 Series
POP® MCS5800 Battery Operated Rivet Tool
POPSet™ Manual Tool Series
POPmatic® Riveting Systems Solutions

Video

See POP® Tools in Action View Windows Media (.wmv)

See AutoSet® in Action View Windows Media (.wmv)

Contact Us