|
Get the power, lose the
weight.
The ProSet® 2500 tool sets new
standards for pneumatic rivet tools. Designed
specifically to set a wide range of blind rivets,
including 3/16" (4.8mm) High Strength and Stainless
Steel. It delivers 2,110 lbs. (9.4 kN) of pulling force
with a "highest in class" force-to-weight ratio of 730
lbf/lb (7.18 kN/kg). |
The ProSet® 2500 tool features many innovative high
performance features including a patented "Quick
Disconnect" nose housing and jaw case for rapid cleaning
and maintenance of the front end without the need for
any tools. With the 2500 "Quick Disconnect" Mandrel
Collection System (MCS), mandrels are safely collected
for easy disposal and cleaner work areas. An
air-isolation switch on the MCS prevents air flow when
the MCS is disconnected. The tough aluminum casing is
designed to prevent damage and enhance the life of the
tool. A left or right 90° swivel air fitting ensures the
tool can be adapted to virtually any workstation
configuration, while the "on/off" switch minimizes air
consumption. The spring return ensures fast, reliable
setting cycles reducing operating cost.
An extended 5" (140mm) front end is also available
for extra reach in special setting situations. The
ProSet® 2500 is compatible with other Emhart
Teknologies' automation systems including the remote
Mandrel Collection System (MCS5000), the POP® Rivet
Presenter (RP) and the SmartSet®.
The ProSet® 2500 series will set 2mm Micro Rivets,
3/32" (2.4mm), 1/8" (3.2mm), 5/32" (4.0mm) and 3/16"
(4.8mm) diameter rivets in all materials including high
strength structural stainless steel rivets.
Features &
Benefits:
- Ergonomic
- Lightweight polymer construction
- Comfortable two finger, low activation force
trigger
- Directional air exhaust (MCS model)
- Performance
- High force-to-weight ratio
- Quick disconnect nose housing
- Quick disconnect jaw case
- Quick disconnect Mandrel Collection System
- Economy
- On/Off, left or right swivel air fitting
- Spring return for a reliable fast setting cycle
- Adaptability
- Extended 5" (140mm) long front end for extra
reach
- POP® Rivet Presenter (RP) compatible
- POP® SmartSet™ rivet monitoring system
compatible
- Safety
- Air-isolation switch during MCS removal
|
RoHS compliant 
