|
| |
|
Lightweight Tool
with
Heavyweight Force.
The lightweight ProSet® 3400 Rivet
Tool is the heavyweight of the ProSet® family. The 3400
delivers 4,160 lbs of pulling force, the highests in its
class but weighs in at just over 4 lbs. Designed
specifically to set a wide range of blind rivets,
including 1/4" (6.4 mm) Structural High Strength and
Stainless Steel. |
|
Built with ergonomics in mind, this tool features
the patented Quick Disconnect nose housing and jaw case
for rapid maintenance of the front end – with no need
for tools! The Quick Disconnect Mandrel Collection
System (MCS) safely collects spent mandrels for easy
disposal and cleaner work areas. The air isolation
switch on the MCS eliminates air flow when the MCS is
disconnected. A rugged aluminum casting is designed to
prevent damage and enhances the life of the
tool.
The left-right 90° swivel air fitting
ensures the tool can be adapted to any workstation and
the “on/off” switch minimizes air consumption and noise.
A spring return ensures fast, consistent and reliable
setting cycles reducing operating costs. The ProSet®
3400 is compatible with the POP® Rivet Presenter, the
POP® Remote MCS System (MCS5000) and POP® specialty
heads.
The 3400 will set 1/8" (3.2mm), 5/32"
(4.0mm), 3/16" (4.8mm) and 1/4" (6.4mm)
diameter
rivets in all materials including stainless steel high
strength structural rivets.
Features &
Benefits:
- Ergonomic
- Lightweight strong polymer construction
- Comfortable two finger, low activation force
trigger
- Directional air exhaust (MCS model)
- On/Off, left or right swivel air fitting
- Performance / Economy
- High force-to-weight ratio
- Quick disconnect nose housing
- Quick disconnect jaw case
- Quick disconnect Mandrel Collection System
- Spring return for a reliable fast setting cycle
- Adaptability
- Extended 8" (200mm) long front end for extra
reach
- POP® Rivet Presenter (RP) compatibility
- POP® Remote Mandrel Collection Systme (MCS5000)
compatible
- POP® Specialty Heads (Corner head / Offset head)
compatible
- Safety
- Air-isolation switch during MCS removal
|
|
| Quick Disconnect
Nose Housing and Jaw Guide |
| The ProSet® 3400
requires no tools for routine maintenance and cleaning.
Front end components can be serviced in minutes right on
the production line eliminating costly downtime. |
|
|
| Quick
Disconnect Mandrel Collection System |
| Spent mandrels are
instantly collected, and with the quick disconnect
system they can be disposed of in no-time, maintaining a
safe and clean work environment. Quick access to the
vacuum filter makes this tool serviceable in minutes.
Undesirable air exhaust can be directed away from the
operator. |
|
|
| Extended Front End |
|
| An optional Extended
8 " (200mm) Front End is available for extra reach
capabilities. It has a standard diameter of 0.882"
(22.4mm) and includes the quick disconnect system so
they can be installed in seconds without tools. |
|
|
| General
Information |
| ProSet®3400 Maintenance Manual (P551 Rev3) |
|
| ProSet®3400 Datasheet (General
Specifications) |
|
|
RoHS compliant 
