 |
Click
To View Hose Clamp Spec Sheets
Single
Wire Clamps(HC)
Single Wire Slim Clamps (HW)
Double Wire Clamps (DW)
Constant Tension Band Clamps (CTB)
Constant Tension Band Light Clamp (CTL)
Hose Clamp Tools
|
|
|
Single Wire Clamps(HC)
Single wire clamps have the most effective holding force and clamping
strength. The single wire concentrates the clamping force in one
specific area around the hose. Single wire clamps can be used on
such applications as household appliances (laundry machines, dishwashers,
etc.), heating and air conditioning systems, automotive and truck
industry, off-road vehicles, utility vehicles (lawn tractors, golf
carts, etc.), snowmobiles, boats and personal watercrafts.
|
 |
Single Wire Slim Clamps (HW)
A slimmer version of the HC hose clamp. The single wire concentrates
the clamping force in one specific area around the hose. Single
wire clamps can be used on such applications as household appliances
(laundry machines, dishwashers, etc.), heating and air conditioning
systems, automotive and truck industry, off-road vehicles, utility
vehicles (lawn tractors, golf carts, etc.), snowmobiles, boats
and personal watercrafts.
|
 |
Double Wire Clamps (DW)
Double wire clamps are used where a lower clamping force than offered
by single wire clamps is sufficient and aesthetics are important.
The double wound wire spreads out the clamping force around the
hose, and are more cost effective than single wire clamps. Applications
include spa fixtures, appliances, heating and air conditioning,
some automotive and truck systems, and utility vehicles.
|
 |
Constant Tension Band Clamps (CTB)
CTBs are used in applications where a lower clamping force than offered
by single wire clamps is sufficient, but a higher clamping force
than produced by double wire clamps is needed. CTBs are found in
spa applications, as well as in the automotive and truck industry.
|
 |
Constant Tension Band Light Clamp
(CTL)
CTLs are cost effective alternatives to other types of band clamps,
but do not compromise quality or reliability. CTLs are used on such
applications as small engines, agricultural and utility vehicles,
automotive systems and appliances.
|
 |
Pre-Opened, Pre-Positioned Clamps
(CTO)
This unique, patented version of a pre-opened clamp is held in the
open position by compressing the tangs and allowing the stop to hook
on to a complementary notch on the side of one of the tangs. The
hook catches this .dimple. when the clamp is opened for a more secure
hold. The clamp can then be glued in position on a hose. The mechanism
to hold the clamp open is accomplished with only minor changes to
the design of the clamp. The CTO cannot be pre-opened any further
than the stop, ensuring the clamp will not be over-expanded. The
CTO is only intended for rubber hose manufacturers who pre-glue clamps
to hoses before supplying to the automotive industry. Contact Rotor
Clamp for more specifications.
|
 |
Hose Clamp Tools
Install/Remove Rotor Clamp Hose Clamps with these durable, quality-engineered
pneumatic/manual tools. |
|
|
Additional sizes, materials and finishes
available on request.
Questions?
contact Thread-Rite |
|
