 |
BE - Retaining Rings for End Play
External Bowed Inch- Compensating for accumulated
tolerances is what a BE "Bowed" retaining ring is designed to do on a shaft.
Once snapped into the groove, bowed rings exert a force or a
"preload" on the retained parts for the range specified in
the catalog.
Size Range: BE--.110-.984 Inches.
|
 |
EL - Retaining Rings for End Play
External Locking Inch- Another variation of a bowed
E ring is the EL. In addition to the bowed design for eliminating
"play" in an assembly, it also features two prongs which extend
from the inner circumference to the open end locking the ring
firmly in the groove.
Size Range: EL-.125-.312 Inches.
|
 |
BHO - Retaining Rings for End Play
Internal Bowed Inch- Compensating for accumulated
tolerances is what a BHO retaining ring is designed to do in
a housing/bore. Once snapped into the groove, bowed rings exert
a force or a "preload" on the retained parts for the range
specified in the catalog.
Size Range: BHO-.250-1.750 Inches.
|
 |
BSH - Retaining Rings for End Play
External Bowed Inch- Compensating for accumulated
tolerances is what a BSH "Bowed" retaining ring is designed to do on a
shaft. Once snapped into the groove, bowed rings exert a force
or a "preload" on the retained parts for the range specified
in the catalog.
Size Range; BSH--.250-1.750 Inches.
|
 |
VHO - Retaining Rings for End Play
Internal Beveled Inch- These rings look exactly
like their HO counterpart, only they have a 15� angle on the
outer edge. This combines with a complementary groove angle
to eliminate end play by wedging itself between the groove
and the retained part.
Size Range: VHO-1.0-10.0 Inches.
|
 |
VSH - Retaining Rings for End Play
External Beveled Inch- These rings look exactly like
their SH counterpart, only they have a 15� angle on the inner
edge. This combines with a complementary groove angle to eliminate
end play by wedging itself between the groove and the retained
part.
Size Range: VSH-1.0-10.0 Inches. |
RoHS compliant 
