Battery Pack For Miner's Light

Spacers are used as belt retention loops and are held in place with a bolt passing through the inside diameter of the spacer.

Expansion Bolt

A spacers is used to vary the distance between the expansion sleeve and the bolt head.

Utility Cart Wheel Assembly

Headed spacer is riveted into place to replace bolt or rivet. Wheel has spacer to prevent fork compression.

Rain Gutter Spacer

Spacers reinforces rain gutter when being installed.

Wheel Chair

Spacers are used to separate hand wheel from wheel as well as in several other locations to replace cut-off tubing.

Rubber Grommet Retainer

The tubular part is used as a compression ring to hold a rubber grommet in position.

Flange Hinge

A traditional spacer application to eliminate flange collapse when bolt is torqued on installation to achieve the desired friction fit.

Leaf Spring

Hardened spacers are force fitted into the inside diameters of rubber absorption grommets. The absorb bolt compression force and isolate bolt pressure from the rubber grommet.

Scissor Jack

Eight spacers are used as distance bushing and reinforcements (welded into place) in the pivot joints.

Castor Wheel Socket (Castor Nib)

The rolled tube is welded to leg. Socket stem with locking ring is press fitted into inside diameter of the tube.